DAB e.sybox Series Manual Download Page 21

Page: 21 / 54

ENGLISH

when configured to work in communication mode, communication

is not available, is not detected, or there are problems.

is not available, is not detected, or there are problems. It blinks

It blinks

with a high frequency during association with other wireless devic

es. Off if communication is not used.

Menus

The complete structure of all the menus and of all the items of which they

are composed is shown in Table 9.

Access to the menus

The various menus can be accessed from the main menu in two ways:

1 - Direct access with a combination of keys

2 - Access by name with a drop-down menu

6.1

Direct Access with a Combination of Keys

The desired menu can be accessed directly by pressing simultaneous

ly the appropriate combination of keys for the required time (for example

MODE SET to enter the Setpoint menu) and the various items in the menu

are scrolled with the MODE key.

Table 7 shows the menus that can be reached with the combinations of

keys.

MENU NAME

DIRECT ACCESS KEYS

HOLD-DOWN TIME

User

On releasing the button

Monitor

2 Sec

Setpoint

2 Sec

Manual

5 Sec

Installer

5 Sec

Technical

assistance

5 Sec

Reset factory

values

2 sec after switching on

appliance

Reset

2 Sec

Table 7: Access to the menus

Summary of Contents for e.sybox Series























































Search results

Summary of Contents for e.sybox Series

Reviews:

Brands by name

Popular brands

DAB e.sybox Series, Manual

Search results

Summary of Contents for e.sybox Series

Reviews:

Brands by name

Popular brands