Daan Tech VOLTZ TOYS SX1718, User Manual

Page: 14 / 28

10
5. WHEEL ASSEMBLY
The wheel is to be assembled in the following order. Insert the front wheel,
tire sleeve (included with wheel), washer, and nut. Tighten the nut to secure,
and install the wheel cover.
a. Front wheel assembly
b. Rear wheel assembly
1. First, adjust the rear axle until both ends are equally distanced on both
sides. The length must be equal on both ends.
2. The wheel is to be assembled in the following order. Insert the rear
wheel, tire sleeve (included with wheel), washer, and nut. Tighten the
nut to secure, and install the wheel cover.
3. Make sure one assembled wheel is in contact with the ground before
assembling the other wheel. (If the other wheel can not be assembled,
pull out the rear axle until it is fully extended, then re-attempt assembly)