-9-
Configurations Codes
**800*1#
End of configuration
**801*{PIN}#
Registration to Base station with {PIN}
**802*1#
Fax/Modem Mode ON e
**802*0#
Fax/Modem Mode OFF
**803*1#
Internal calls enabled
**803*0#
Internal calls disabled
**804*1#
End Symbol ON = #
**804*0#
End-Symbol OFF
**805*1#
transparent Mode ON
**805*0#
transparent Mode OFF
**806*{0..2}#
Caller Rights enabled for
0: incoming and outgoing calls
1: outgoing calls 2: incoming calls
**807*1#
DTMF Signalling ON
**807*0#
DTMF Signalling OFF
**808*{DTMFsequence}#
DTMF Signalling Sequence 2-digit
**809*{DTMF tone}#
DTMF Signalling tone 1-digit
**810*{0 ..3.. 9}#
Flash Time
0: 50ms 1: 60ms 2: 80ms
3: 100ms 4: 120ms 5: 180ms
6: 250ms 7: 300ms 8: 600ms
9: 800ms
**851*{auto number}#
Auto call number , max 24-digit
**852*1#
Auto call ON
**852*0#
Auto call OFF
**899*3853171#
restore ex-works-setup
Ex-works parameters are printed bold
Please close configuration mode with sequence
**800*1#
In case your DECT Base does not support PIN „0000“, repeat
Registration to Base with
**801*{PIN}#
and use PIN of DECT Base
.
