-12-
FAQ: Questions and Answers
Please consult also the website of your dealer and/or manufacturer to
get updated information and FAQs about DA1280.
problem
root cause
remedy
no line, no signalling,
no dialling possible
The analoge terminal is not properly
connected to DA1280
current line is occupied by further
devices
Crosscheck cable and connectors
between DA1280 and connected
wait till line is free.
No DECT Link to BASE.
DA1280 is not (properly) registrated
to DECT BASE.
LED2 (DECT Link is red
DECT Base is switched OFF
Execute Registration and take
care about proper PIN of Base
Reduce the position of DA1280
to Base till LED2 = GRÜN
Switch-ON DECT Base and wait
several seconds
DECT Registration
does not work
DECT Base is not in Registration
Mode.
PIN code is wrong
Activate Registration Mode of
DECT Base .
Use
Registration
via
Configuration
Codes
**801*{PIN}# or change OIN of
Base into -PIN auf „0000“ and
repeat Registration
You can hear Dial
signalling tone, but
dialling is not
executed.
Transparent Mode is ON .
switch >OFF Transparent Mode
via Configuration Code
**805*0#
