Instructions For Hanging A Da-Lite Screen To A Drop
Or Suspended Ceiling
For use with Model B, Class-Rite or Slimline Screens. For screens up to 50 lbs.
Do not use on screens weighing over 50 lbs.
1. Measure distance between D-rings of screen and transfer this distance to
T-bar for location of T-bar clip.
2. Attach T-bar clip to T-bar as shown in Figures 1 and 2.
NOTE: A support wire must be attached to the top of each T-bar Clip
and attach to the building structure above the suspended ceiling. These
support wires should be used to support the weight of the screen only,
not the suspended ceiling. The t-bar grid ceiling should be installed
according to the manufacturer’s instructions and the additional support
wires should only support the additional weight of the screen.
3. Insert S-hook into hole of adapter and D-ring of screen.
4. Use pliers to close both loops of S-hook.
5. Do not remove for re-use.
Figure 2
Press Halves
Together Until Tab
Snaps Into Hole
T-Bar
Figure 1
T-Bar Clip
T-Bar Clip
Support Wire
(Not Included)
T-Bar Clip
S-Hook
Adapter
