3
MORE SCREEN DROP
1. Place operating switch in
“down”
position.
2. When the screen stops, turn the white
“down”
limit knob (Fig. 2) one-quarter turn counterclockwise. Test by raising
picture surface approximately two feet, then lower again. Repeat until desired picture surface position is attained.
CAUTION: Do not adjust for more drop than what was ordered. At least 1-1/2 wraps of fabric must remain on the roller. This
screen comes standard with 0" or 2" black at the top. See the specification data sheet for details.
LESS SCREEN DROP
1. Raise picture surface approximately two feet above desired level.
2. Place operating switch in
“off”
position.
3. Turn the white
“down”
limit switch (Fig. 2) one-quarter turn clockwise. Test by raising picture surface approximately
two feet, then lower again. Repeat until desired picture surface position is attained.
ADVANTAGE
®
DELUXE ELECTROL
®
INSTRUCTIONS FOR STANDARD CONTROL
220 / 240V WIRING DIAGRAM
120V WIRING DIAGRAM
SCREEN MOTOR
BLACK (DOWN)
RED
(UP)
W
W H
H II TT EE
(COMMON)
RED
(DOWN)
BLACK (UP)
W
W H
H II TT EE
(COMMON)
RED
(UP)
BLACK (DOWN)
W
W H
H II TT EE
(COMMON)
OPTIONAL RF OR IR
REMOTE CONNECTOR
W
WHHIITTEE
(COMMON)
BLACK (HOT)
GREEN
(GROUND)
POWER INPUT
120VAC/60HZ
DOOR MOTOR
DOWN
STOP
UP
SCREEN MOTOR
EYE AUX
BLUE
(COMMON)
BROWN
(HOT)
GREEN
/
YELLOW
(GROUND)
DOOR MOTOR
DOWN
STOP
UP
NOTE: Electrical connections on left end of
case.
NOTE: Electrical connections on left end of
case.
AUX EYE
OPTIONAL RF OR IR
REMOTE CONNECTOR
▲
!
NOT USED
WW
HH
IITT
EE
(COMMON)
RED
(UP)
BLACK (DOWN)
NOT USED
NOT USED
W
W H
H II TT EE
(COMMON)
RED
(DOWN)
BLACK (UP)
GREEN
(GROUND)
W
W H
H II TT EE
(COMMON)
RED
(UP)
BLACK (DOWN)
GREEN
(GROUND)
W
W H
H II TT EE
(COMMON)
RED
(UP)
BLACK (DOWN)
GREEN
(GROUND)
FRONT OF
BACK OF
WALL SWITCH WALL SWITCH
W
W H
H II TT EE
(COMMON)
RED
(DOWN)
BLACK (UP)
GREEN
(GROUND)
NOTE: 20-24AWG WIRE RECOMMENDED
FOR CONNECTING WALL SWITCH TO THE
DUAL MOTOR CONTROLLER
POWER INPUT
240VAC/50HZ
FRONT OF
BACK OF
WALL SWITCH WALL SWITCH
NOT USED
NOT USED
NOT USED
RED
(UP)
BLACK (DOWN)
W
W H
H II TT EE
(COMMON)
WW
HH
IITT
EE
(COMMON)
RED
(UP)
BLACK (DOWN)
BROWN
(DOWN)
BLACK (UP)
BLUE
(COMMON)
BLACK (DOWN)
BROWN
(UP)
BLUE
(COMMON)
BLUE
(COMMON)
BLACK (UP)
BROWN
(DOWN)
GREEN
/
YELLOW
(GROUND)
BLUE
(COMMON)
BLACK (UP)
BROWN
(DOWN)
GREEN
/
YELLOW
(GROUND)
BLUE
(COMMON)
BLACK (DOWN)
BROWN
(UP)
GREEN
/
YELLOW
(GROUND)
BLUE
(COMMON)
BLACK (DOWN)
BROWN
(UP)
GREEN
/
YELLOW
(GROUND)
DOOR MICROSWITCH
DOOR MICROSWITCH
NOTE: 20-24AWG WIRE RECOMMENDED
FOR CONNECTING WALL SWITCH TO THE
DUAL MOTOR CONTROLLER
