D3 DesignCore RVP-TDA3 Series, Quick Start Manual

Page: 8 / 34

- 8 -
www.d3engineering.com 585.429.1550
D3Engineering.com ▪ 585.429.1550
DesignCore™ TDA3x Product Family ▪ Quick Start Guide
Document No. 00C-131 ▪ Version 1.0 ▪ Release Date: 1/17/2019
CONFIDENTIAL ▪ 8
2.0 Contents of RVP-TDA3x ADAS Development Kit
Before setting up the RVP-TDA3x ADAS Development Kit, identify all the parts listed in
Table 3 (below).
Note: Contents in box may vary for other products in the TDA3x Product Family.
Quantity D3 Part Number Description
1 1000391 Assembly, ADAS baseplate
2 1000396 Assembly, Wheel Chassis, ADAS
4 1000339 Assembly, Camera D3, ADAS
4 1000354 Screw, M5X16, Black
4 1000353 Nut, Stop, M5
1 1000320 Monitor
1 1000367 Cable, FAKRA Jack to FAKRA Jack, 11.5
2 1000368 Cable, FAKRA Jack to FAKRA Jack, 16
1 1000369 Cable, FAKRA Jack to FAKRA Jack, 28
4 1000362 Screw, Button Head, M5x16mm, Black
1 1000409 3/32” Hex Key Wrench
1 1000410 3mm Hex Key Wrench
1 1000405 Calibration Target Sheet
1 1000015 USB, Micro B, 3ft
1 1000285 Cable, HDMI, Mini to Full, 6ft
1 1000286 Micro SD Card
1 1000244 External Power and I/O cable
1 1000021 Cable, M12, RJ45
1 1000321 Power Supply Auto Adapter
1 1000324 Power Supply, RVP-TDA3x Module
1 1000020 JTAG Debugging Cable
1 PCA-00C003056 JTAG Debugging Board
Table 3. RVP-TDA3x ADAS Development Kit contents
•
Input voltage range: 9VDC to 20VDC operation
•
Protected to 40VDC with surges to 60VDC
•
12V nominal
•
The system is reverse battery protected
•
Expect no more than 1A current draw