d2itsu CDV-46, Installation And Maintenance Manual, Page: 39 / 74

Wired Controller
CDV-46
33
Note:
ķ the available modes are different for different models, the wired controller will
automatically select mode setting range according to the model of indoor
unit.
ĸ The Auto mode can be only set at the master indoor unit.
Ĺ Under Auto mode, if the indoor unit is running under Cooling, the icons“ ”
and “ ” will light up; if the indoor unit is running under Heat ing, the
icons“ ” and “ ” will light up.
6.3 TEMPERATURE SETTING
Pressing “ ” or “ ” button in On status increases or decreases set
temperature by 1°C or 1°F ; holding “ ” or “ ” button increases or d ecreases set
temperature by 1°C or 1°F every 0.3s.
In Cooling, Fan, Heating, Floor Heating, 3D Heating or Space Heating mode,
temperature setting range is 16°C~30°C or 61°F ~86°F .
In Dry mode, the temperature setting range is 12°C or 54°F , 16°C~30°C or
61°F ~86°F . In Dry mode, when temperature is 16°C or 61°F , continuously press
“ ” button twice to dec rease temperature to 12°C or 54°F (when save function is
activated, the temperature in Dry mode can’t be adjusted to 12°C or 54°F and the
setting range is “lowest tempe r ature in Save mode” ~ 30°C or 86°F ).
Note:
ķ
Under Auto mode or Absence function is activated, the setting temperature