11
Currently playing pattern is shown by the pattern number in the display box with the pattern name below it:
Blinking LED on
Step buttons
mark the pattern position. The Part LED’s combined with the
Basic variation
switch
indicate the part.
States of these LEDs give us all 4 possible pairs:
A1
,
A2
,
B1
and
B2
.
When Nepheton is stopped in
Native mode
, the
Tap
button allows the selection of
Regular patterns
or
Fill-in patterns
(shown by a blinking LED in corresponding section on the chosen step button). If the blinking LED is in the
Regular
pattern
area, then the chosen pattern will start to play when
Start
is pressed. If the blinking LED is in the
Fill-in pattern
area, then when play is started the chosen Fill-in pattern will play followed by the regular pattern.
Pattern number and name
Basic variation switch
Part indication
2
Play modes
•
Internal pattern storage
Summary of Contents for Nepheton
Page 1: ...User Manual Drum Machine ...
