manualshive.com logo in svg

D.W. Fearn VT-7, Operating Instructions Manual

Share
Download
D.W. Fearn VT-7 Operating Instructions Manual Download Page 19

D.W. FEARN 

VT-7 Compression Amplifier

23

Semi-professional equipment frequently uses a reference level of -10 dBv (roughly 14 dB
lower than pro equipment). Although the VT-7 can feed the unbalanced, -10 dBv inputs of
semi-pro gear with no difficulty, the VT-7 VU meter will have to be recalibrated in order to be
useful. (See Section 6 - Maintenance.)

SUGGESTIONS:

You have chosen to use the VT-7 because of the superior sound it provides. To gain the max
imum benefit from your investment, it is important that you hook up the VT-7 so that other
factors do not adversely affect the sound quality.

Except for extremely short Attack and Release times, the VT-7 will provide quality sound with
any settings. But like any instrument, you will find the best adjustment of the controls by
experimenting. The starting adjustments listed above will get you started. Now play with the
controls to find the sound that fits your project perfectly.

Use your ears to find the setting that sounds best to you for any given sound.

Summary of Contents for VT-7

























Reviews:

No comments

Brands by name

Popular brands

Load more brands