APPENDIX (Firmware Upgrade)
Make [program] folder at SD root folder as below,
First, upgrade the BX1500/ main unit,
Second, install new PC viewer software on your PC,
and then initialize the SD card using new PC viewer software.
Copy “BX1500_X.X.X.bin” file in to the SD card [program] folder.
.
1. Preparing Firmware
2. Upgrade BX1500/
Insert the prepared SD card to BX1500 Series and turn on the power.
The Blue & Red LED will be quickly blink while the unit is upgrading.
It will also “Beep” continuously, Upgrading the unit usually takes about
2 to 3 minutes.
Warning: Do not turn off the power during upgrading.
If the upgrade fails, the “Smarty BX1500/” unit should be
returned to your local distributor.
Once the upgrading is finished, the unit will automatically turn off and on the power.
38
[NOTE] To get the upgrade firmware, please contact your local distributor.
New firmware is released occasionally by D-Teg.
If BX1500 series records as normal, turn off the power.
Insert the SD card into your PC and initialize it using the software once
you have successfully tested the unit.
Summary of Contents for Smarty HD BX1500
Page 2: ......
Page 32: ...15 Click About icon to check the product information About icon 29 Product Information ...
Page 37: ...34 ...
