D-Teg 2.4GHZ Digital WirelessMicrophone System, User Manual

Page: 6 / 8

3. GUIDELINES AND RECOMMENDATIONS FOR BEST PERFORMANCE
Compatibility
The transmitter and receiver must synchronize to work together (see Synch process on page 3). The synch
operation only needs to be performed the first time a system is used, or when a new Receiver is used with a
Receiver previously synched to another Receiver.
Do not synch multiple times, just once until a new
Receiver is used. Any Receiver can be synchronized with any Transmitter.
Using Multiple Wireless Systems
This system has 95 possible “channels” that are really different frequency hopping schemes. Each
synchronized Receiver and transmitter will automatically find a clear channel so up to 40 systems can work
together in one location depending on other interference problems
Potential Sources of Interference
There are many potential sources of interference for your wireless system. Any electronic product that
contains digital circuitry including digital signal processors (reverb/multi-effects units), electronic keyboards,
digital lighting controllers, CD and DVD players, and computers, all emit RF energy that can adversely affect
the performance of your wireless system. It is always best to place the receiver as far away as possible from
these devices to minimize potential problems.
This system operates in the 2.4MHz ISM band and other devices in that band may interfere. The spread
spectrum technique used in this system is very robust and should operate even in the presence of other
2.4MHz devices such as walkie-talkies, LANs, cordless phones, etc. in the area.
Battery Recommendations
The Lithium-Ion battery built into this transmitter will work at full capacity for over 500 charge cycles. If you
notice lower than usual battery life over time, it may be time to replace the cell
Warnings
Do not use this product in or near water, i.e. near a bathtub, sink, or swimming pool.
Do not use this product in the vicinity of a gas leak or to report a gas leak.