Even at low levels, dogs may yelp when stimulation is intro-
duced due to surprise or startles they receive, not because
it is hurting them. Do not rush up and pet or hug the dogs
because the dogs will think that you hurt them. When you
do this, the dog will learn that every time they feel the tingle
they just have to yelp and the tingle will stop, and you will
hug and pet them. At low levels the dog feels a tickle. This
tickle is the negative response that the dog will associate
with the problem barking. Low level stimulation is a more
effective way to train a dog. Low level stimulation is less
painful than swatting with a newspaper, spanking with your
hand or yelling at your dog. When done properly, low level
stimulation training is more humane, effective and a better
way to train your dog. For more information on how to train
with electronic No-Bark collars, consult a professional
trainer or buy a “how to train” video or book on this subject
from your local pet or sporting goods retailer.
Basic Information on Use
IMPORTANT
- When screwing in the electrodes and sensors,
tighten by hand only. Hand tightening will allow the electrodes to
vibrate for maximum stimulation.
Never use a wrench on elec-
trodes or bark sensor.
Choosing the Correct Electrodes
The proper set of electrodes you should use is determined
by which set is long enough to make good contact with the
dog’s skin. Good contact is essential for the proper opera-
tion of the unit. Longer haired dog’s will usually require the
longer 1/2” contacts (included in package), and shorter
haired dogs the 3/8” (on unit from factory).
Summary of Contents for Ultra Min-e 2090
Page 1: ...Owner s Manual ...
