12
ADJUSTING & POSITIONING YOUR
COLLAR FOR PROPER FIT CONT.
•
All electronic collars need to be very snug to work
properly. They must be just tight enough to allow the
“prongs” or electrodes to make good skin contact.
•
If your collar is too loose, the stimulation may not work
properly because good skin contact is not being
achieved. This can directly affect the stimulation
performance and whether or not the dog will receive the
stimulation. Always check for good “prong” contact if
it appears that your dog is not responding to the
stimulation.
•
A loose collar can promote skin irritation from moving
or rubbing too much on a dog’s neck while they are
running or training. The proper snug fit will help
prevent this from occurring.
•
Proper fit of the collar is important. It should be just
tight enough on the dog’s neck to make good skin
contact and allow the dog to breath normally. The
collar should never be so tight on the dog’s neck that it
restricts the dog’s normal breathing pattern.
•
For proper positioning of your collar receiver box, it
should be placed on the center of the dog’s neck..
BATTERIES
All
EDT Super Trainer
TM
training collars are equipped
with rechargeable Nickel Metal Hydride (NiMH) batteries.
NiMH batteries are not memory sensitive and do not
require depletion before recharging.
Summary of Contents for SUPER TRAINER EDT 100
Page 19: ...19 ...
