7
PARTS & FUNCTIONS
Intensity Selection Dial
The intensity selection dial can be set
from level 1 to level 16 to find the
exact stimulation level for your dog
(see
page 15
).
Transmitter Antenna
Always check that the antenna is securely fastened to
the transmitter before each use. Hand tighten only.
Use care when attaching antenna. Over-tightening
may cause damage to the antenna or antenna mount.
Momentary and Continuous Stimulations
Pressing the upper button will make the collar give a
Momentary (or ‘Nick’) Stimulation. Pressing the lower
button gives a Continuous Stimulation.
These buttons
are the same on every model of the CDT PLUS series.
Collar Selecting Switch
Switching between collar units can be controlled by
moving the Collar Selection Switch to the desired unit.
Vibration Buttons (CDT 2000
PLUS
only)
Pressing the button on the left (#1) of the transmitter
will make the collar vibrate only. Pressing the button
on the right (#2) of the transmitter will make the collar
vibrate only for half a second, and then adds simulta-
neous Continuous Stimulation to the Vibration.
Battery Charging Receptacle
After charging, always cover the jack with the rubber
plug to prevent foreign particles from getting inside.
Summary of Contents for CDT 1000 PLUS
Page 2: ...2 ...
