8
OPERATING THE 1145DT
Turning the 1145DT ON & OFF:
Turning the Unit ON:
•
Touch either magnet to the White Dot on the side of the
1145DT collar box for approximately one half second
until the number 0 flashes briefly on the LED Display.
•
The number 0 will be followed immediately by another
number (0-8) which will flash for approximately
1.5 seconds. This indicates on which intensity level the
unit is currently set.
•
The small sub LED light on the display will blink steadily
every 2.5 seconds to let you know the unit is ON and
functioning properly.
Turning the Unit OFF:
•
Touch either magnet to the white dot for 2 seconds. The
number 0 will quickly blink twice on the display. This
indicates the unit is now off.
Changing the Stimulation Level
While the unit is on quickly touch either magnet to the White
Dot (less than one second). Each time a magnet touches the
White Dot the stimulation level will increase by one level.
The level will flash in the display for 1/2 second. When the
level reaches 8 the next touch will reset the unit back to 0.
5
PARTS & FUNCTIONS
•
The collar belt is adjustable from approximately 7” to
approximately 21”.
•
The round circle on the clip with D.T.S. imprinted on it is a
magnet for turning the unit ON/OFF and changing intensity
levels. (You can also use the key ring magnet.)
•
The White dot on the collar box is where you hold one of
the magnets to turn the unit ON/OFF and change intensity
levels.
•
The display shows an LED number to indicate the current
intensity level and also has a small blinking light to let you
know the unit is ON.
•
The Sensor is vibration sensitive and is designed to not be
activated by extraneous noises (including rattling dog tags
or other dogs barking).
•
The unit starts on intensity level Zero and cycles through
intensity level Eight then back to Zero.
