T E C H N I C A L S E R V I C E M A N U A L ( V E R . 1 . 1 )
12
B. Check initialized setting (5-CIRCUIT DIP S/W)
C. Address Setting (8-CIRCUIT DIP S/W)
The above DIP switches shown in Fig. 9 can be used for setting up a protocol where DIP
switch, No.3. i.e. ‘ADDR’ turning to ‘INI’
Please set up the desired protocol or address for each camera as given in this operation
manual.
z
In factory default, the DIP switches turn on
as below:
z
TM (Terminal Resister) switch : OFF
z
Data protocol : RS 485
z
Turn to ADDRESS mode
z
Turn to INT mode
z
Protocol : D-MAX
(Please refer to operation manual for
protocol setting)
z
TM (Terminal Register) is used for turning
on at final dome -farthest from keyboard
controller- among several domes in
parallel.
z
Switches of RS485 mode, NT/PAL mode
and INT/EXT mode are used in factory
default in themselves.
<Fig. 9>
Summary of Contents for Superior Speed Dome
