22
IMAGE ADJ.
LENS SHAD OFF
2D DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 142
SHARPNESS 016
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SPECIAL
CAM TITLE OFF
MOTION OFF
PRIVACY OFF
PARK LINE OFF
IMAGE ADJ.
↙
VERSION
RETURN
• AREA SELECT: Select the programmed privacy area (No.1~8)
• AREA STATE: Turn on and off the programmed privacy masking.
• HEIGHT: Adjust vertical height of the programmed privacy area.
• WIDTH: Adjust horizontal width of the programmed privacy area.
• LEFT/RIGHT: Move left-right (horizontal) position of the programmed privacy area.
• TOP/BOTTOM: Move up-down (vertical) position of the programmed privacy area.
• COLOR : Setup color of the programmed motion area mask.
• RETURN: Save setup value and return to previous menu.
④
IMAGE
→
- LENS SHAD.
User ought to control lens shading at the areas of operating AGC because each lens has
difference brightness.
- 2D DNR
This function reduces the background noise in a low luminance environment.
• ON: Activates 2D DNR so that noise is reduced. Set the 2D DNR mode to ‘'ON’' and
press the SET button. Then you can adjust the noise reduction level.
• OFF : Deactivates 2D DNR. Noise is not reduced.
- MIRROR
The image will be reversed on the screen, if you press “on” button
- FONT COLOR
User can change Font color and there are 15 colors in the menu.
- CONTRAST
User can control contrast that is the degree of difference in tone between the colors,
or the light and dark parts
•
Level : 1 ~ 255
- SHARPNESS
As you increase this value, the picture outline becomes stronger and clearer.
