DXS-3350SR Gigabit Layer 3 Switch
QoS Output Scheduling
QoS can be customized by changing the output scheduling used for the hardware queues in the Switch. As with any changes
to QoS implementation, careful consideration should be given to how network traffic in lower priority queues is affected.
Changes in scheduling may result in unacceptable levels of packet loss or significant transmission delay. If you choose to
customize this setting, it is important to monitor network performance, especially during peak demand, as bottlenecks can
quickly develop if the QoS settings are not suitable. In the
Configuration
folder open the
QoS
folder and click
QoS
Output Scheduling
to view the screen shown below.
Figure 6- 44. QoS Output Scheduling Configuration window
You may assign the following values to the QoS classes to set the scheduling.
Parameter Description
Max. Packets
Specifies the maximum number of packets the above specified hardware priority
queue will be allowed to transmit before allowing the next lowest priority queue to
transmit its packets. A value between 0 and 15 can be specified.
Click
Apply
to implement changes made.
NOTE:
Entering a 0 for the
Max Packets
field in the
QoS Output Scheduling
Configuration
window above will create a Combination Queue. For more
information on implementation of this feature, see the next section,
Configuring
the Combination Queue.
92
Summary of Contents for xStack DXS-3350SR
