D-Link xStack DGS-3420-28PC Hardware Installation Manual Download Page 9 | Manualshive

Page: 9 / 53

background image

xStack® DGS-3420 Series Layer 2+ Managed Stackable Gigabit Switch Hardware Installation Reference Guide

9

Chapter 1

Introduction

Switch Description

Features

Ports

Front-Panel Components

LED Indicators

Rear Panel Components

Side Panel Components

Switch Description

D-Link's DGS-3420 Series is a high performance member of the D-Link xStack® family. Ranging from 10/100/1000
Mbps edge switches to core gigabit switches, the xStack® switch family has been future-proof designed to provide
fault tolerance, flexibility, port density, robust security and maximum throughput with a user-friendly management
interface for the networking professional.

The Series features the following list of switches:

•

DGS-3420-28SC

: 20 SFP ports + 4 Combo 1000Base-T/SFP ports + 4 10GE SFP+ ports L2+ Stackable

Managed Switch

•

DGS-3420-28TC

: 20 10/100/1000Base-T ports + 4 Combo 1000Base-T/SFP ports + 4 10GE SFP+ ports L2+

Stackable Managed Switch

•

DGS-3420-26SC

: 20 SFP ports L2+ 4 Combo 1000Base-T/SFP ports + 2 10GE SFP+ ports L2+ Stackable

Managed Switch

•

DGS-3420-28PC

: 20 10/100/1000Base-T PoE ports + 4 Combo 1000Base-T PoE/SFP ports + 4 10GE SFP+

ports L2+ Stackable Managed Switch

•

DGS-3420-52T

: 48 10/100/1000Base-T ports + 4 10GE SFP+ ports L2+ Stackable Managed Switch

•

DGS-3420-52P

: 48 10/100/1000Base-T PoE ports + 4 10GE SFP+ ports L2+ Stackable Managed Switch

This cost effective Gigabit Switch provides an affordable solution for administrators to upgrade their networks to high
speed Gigabit connections. The dedicated stacking ports offer up to 40G bi-directional bandwidth, which makes the
DGS-3420 Series also suitable as a backbone solution for SMBs. The advanced ACL and user authentication
functions on the Switch extend the network security coverage from core to the edge. A unique D-Link Safeguard
Engine protects the DGS-3420 Series from the threat of worms and viruses, thereby increasing overall reliability,
serviceability, and availability

The Switch has a combination of 1000BASE-T ports and SFP ports that may be used in uplinking various network
devices to the Switch, including PCs, hubs and other switches to provide a gigabit Ethernet uplink in full-duplex mode.
The SFP (Small Form Factor Portable) combo ports are used with fiber-optical transceiver cabling in order to uplink
various other networking devices for a gigabit link that may span great distances.

«
...
7
8
9
10
11
...
»

Summary of Contents for xStack DGS-3420-28PC






















































Reviews:

No comments

Related manuals for xStack DGS-3420-28PC

OfficeConnect 5

Brand: 3Com Pages: 2

OfficeConnect 3C1670500C

Brand: 3Com Pages: 18

Brand: Cudy Pages: 2

Brand: Waters Network Systems Pages: 12

EdgePoint EP-S16

Brand: Ubiquiti Pages: 22

Brand: Kramer Pages: 2

Centerpoint 2x16

Brand: Epicenter Pages: 25

Brand: Edimax Pages: 2

Brand: Racal Instruments Pages: 33

Brand: HDTV Supply Pages: 15

GlobeCaster STUDIO 4000

Brand: Global Streams Pages: 144

TNM4000-TP36FF4X16G24P

Brand: MRD Pages: 38

Brand: Guntermann & Drunck Pages: 8

Brand: Cypress Pages: 4

Brand: Eminent Pages: 6

Brand: Linksys Pages: 4

Brand: ClimaxDigital Pages: 9

OBERON C SOUND HUB COMPACT

Brand: Dali Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands