D-Link xStack DGS-3420-28PC Hardware Installation Manual Download Page 40

Page: 40 / 53

xStack® DGS-3420 Series Layer 2+ Managed Stackable Gigabit Switch Hardware Installation Reference Guide

Web Pages

When connecting to the management mode of the Switch with a Web browser, a login screen is displayed. Enter a
user name and password to access the Switch's management mode.

Below is a list of the main folders available in the Web interface:

System Configuration

- In this section the user will be able to configure features regarding the Switch’s configuration.

Management

- In this section the user will be able to configure features regarding the Switch’s management.

L2 Features

- In this section the user will be able to configure features regarding the Layer 2 functionality of the

Switch.

L3 Features

- In this section the user will be able to configure features regarding the Layer 3 functionality of the

Switch.

QoS

- In this section the user will be able to configure features regarding the Quality of Service functionality of the

Switch.

ACL

- In this section the user will be able to configure features regarding the Access Control List functionality of the

Switch.

Security

- In this section the user will be able to configure features regarding the Switch’s security.

Network Application

- In this section the user will be able to configure features regarding network applications

handled by the Switch.

OAM

- In this section the user will be able to configure features regarding the Switch’s operations, administration and

maintenance (OAM).

Monitoring

- In this section the user will be able to monitor the Switch’s configuration and statistics.

NOTE:

Be sure to configure the user name and password in the

User Accounts

window before

connecting the Switch to the greater network.

Summary of Contents for xStack DGS-3420-28PC






















































Search results

Summary of Contents for xStack DGS-3420-28PC

Reviews:

Related manuals for xStack DGS-3420-28PC

Brands by name

Popular brands

D-Link xStack DGS-3420-28PC, Hardware Installation Manual

Search results

Summary of Contents for xStack DGS-3420-28PC

Reviews:

Related manuals for xStack DGS-3420-28PC

Brands by name

Popular brands