xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
85
To establish the rule for a previously created Access Profile:
In the
Configuration
folder, click the
Access Profile Table
link opening the
Access Profile Table
window. Under the heading
Access Rule, clicking
Modify
, will open the following window.
Figure 6- 61. Access Rule Table window
The user may search for the settings of a particular Access ID by entering that ID into the Access ID field above and clicking Find.
The user may display all Access ID entries by clicking the View All Entry button.
To create a new rule set for an access profile click the
Add
button. A new window is displayed. To remove a previously created
rule, click the corresponding button.
Figure 6- 62. Access Rule Configuration window (IP)
Configure the following Access Rule Configuration
settings:
Parameter
Description
Profile ID
This is the identifier number for this profile set.
Mode
Select
Permit
to specify that the Switch, according to any additional rule, forward the packets
that match the access profile added (see below).
Select
Deny
to specify that packets that match the access profile are not forwarded by the
Switch and will be filtered.
