manualshive.com logo in svg

D-Link xStack DES-3526DC, User Manual

The D-Link xStack DES-3526DC is a powerful networking switch, designed to meet the needs of modern businesses. Featuring advanced features and high performance, this product ensures seamless connectivity. For detailed instructions on setup, configuration, and troubleshooting, a comprehensive user manual is available for free download from manualshive.com.

Share
Download
background image

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 

 

182

Topology 

The 

Topology

 window will be used to configure and manage the Switch within the SIM group and requires Java script to function 

properly on your computer. The following message should appear the first time the user clicks the 

Topology

 link in the 

Single IP 

Management

 folder. 

 

Figure 10- 3. Java window 

Clicking the 

here

 link will setup the Java Runtime Environment on your server and lead you to the topology window, as seen 

below. 

 

Figure 10- 4. Single IP Management window-Tree View 

The Tree View window holds the following information under the Data tab: 

Parameter              Description  

Device Name 

This field will display the

 

Device Name of the switches in the SIM group configured by the 

user. If no Device Name is configured by the name, it will be given the name default and 
tagged with the last six digits of the MAC Address to identify it. 

Local Port 

Displays the number of the physical port on the CS that the MS or CaS is connected to. The 
CS will have no entry in this field. The CS will not display an entry in this field. 

Speed 

Displays the connection speed between the CS and the MS or CaS. The CS will not display 
an entry in this field. 

Remote Port 

Displays the number of the physical port on the MS or CaS that the CS is connected to. The 
CS will have no entry in this field. The CS will not display an entry in this field. 

MAC Address 

Displays the MAC Address of the corresponding Switch. 

Model Name 

Displays the full Model Name of the corresponding Switch. 

To view the

 Topology Map

, click the 

View

 menu in the toolbar and then 

Topology

, which will produce the following window. 

The 

Topology View

 will refresh itself periodically (20 seconds by default). 

Summary of Contents for xStack DES-3526DC





































































































































































































































































Reviews:

No comments

Related manuals for xStack DES-3526DC

D-Link DI-707 User Manual preview
DI-707
Brand: D-Link Pages: 36
Brightlink 16x16 Manual preview
16x16
Brand: Brightlink Pages: 33
Ubiquiti ES-24-250W Quick Start Manual preview
ES-24-250W
Brand: Ubiquiti Pages: 24
Ubiquiti USW-24 User Manual preview
USW-24
Brand: Ubiquiti Pages: 13
Ubisys ZIGBEE S2(-R) Quick Start Manual preview
ZIGBEE S2(-R)
Brand: Ubisys Pages: 2
Cabletron Systems SmartSwitch 6500 Installation And Setup Manual preview
SmartSwitch 6500
Brand: Cabletron Systems Pages: 62
Magnetrol B75 Installation And Operating Manual preview
B75
Brand: Magnetrol Pages: 28
Qlogic SilverStorm 9000 Hardware Installation Manual preview
SilverStorm 9000
Brand: Qlogic Pages: 50
Eaton HOMECT Installation And Setup Manual preview
HOMECT
Brand: Eaton Pages: 5
N-Tron 708M12 User Manual & Installation Manual preview
708M12
Brand: N-Tron Pages: 169
NBK EORP-200 Instruction Manual preview
EORP-200
Brand: NBK Pages: 32
KanexPro HDMX44A-18G Operation Manual preview
HDMX44A-18G
Brand: KanexPro Pages: 35
C&C TECHNIC VAX-8204F User Manual preview
VAX-8204F
Brand: C&C TECHNIC Pages: 2
KinAn DV2302 User Manual preview
DV2302
Brand: KinAn Pages: 5
NA-DE 03009 Manual preview
03009
Brand: NA-DE Pages: 4
AMX Enova DGX 100 Series Quick Start Manual preview
Enova DGX 100 Series
Brand: AMX Pages: 2
Emulex InSpeed 350 User Manual preview
InSpeed 350
Brand: Emulex Pages: 75
LevelOne FGU-5021 Quick Installation Manual preview
FGU-5021
Brand: LevelOne Pages: 15

Brands by name

Popular brands

Load more brands