Configuration
D-Link Web Smart Switch User Manual
3
3
7
7
Figure 4.39 – L2 Functions > MAC Address Table > Static Mac Address
To initiate the removal of auto-learning for any of the uplink ports, click
Enabled
to enable this feature, and
then select the port(s) for auto learning to be enabled.
The
Static MAC Address Lists
table displays the static MAC addresses connected, as well as the VID. To
add a new MAC address, you need to select the assigned Port number, enter both the Mac Address and VID,
and then Click
Add
. Click
Delete
to remove the corresponding entry, or click
Delete all
to remove all entries.
By disabling Auto Learning capability and specifying the static MAC addresses, the network is protected from
potential threats like hackers, because traffic from illegal MAC addresses will not be forwarded by the Switch.
For each port, this table displays the MAC address learned by the Switch. To add a MAC address to the List,
tick the checkbox in
Add to Static MAC
, and then click
Apply
associated with the identified address. Click
Select All
to tick all entries in the list. Click
Clear
to deselect all entries.
L2 Functions > MAC Address Table > Dynamic Forwarding Table