5 Configuration
D-Link Web Smart Switch User Manual
After configuration, the user will be able to share the network resources set on the shared group of ports
(nominated as PVID 1), with both smaller subsets of VLANs (nominated PVID 2, 3 and 4). However, VLAN 2,
3 and 4 groups are incapable of sharing information with each other directly. Click
Example
to see the
example to configure asymmetric VLAN in larger networks.
Note:
When Asymmetric VLAN is enabled, IGMP
Snooping, Management VLAN, and MAC address
table will be reset to default.
Configuration > 802.1Q Management VLAN
The 802.1Q Management VLAN setting allows you to transfer the authority of the switch from the default
VLAN to others created by users. This allows managing the whole network more flexible.
By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN
when this function is enabled. There can only be one management VLAN at a time.
Figure 60 – Configuration > 802.1Q Management VLAN
Configuration > Voice VLAN > Voice VLAN Setting
Voice VLAN is a feature that allows you to automatically place the voice traffic from IP phone to an assigned
VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the security of
VoIP traffic are guaranteed. The Voice VLAN function will only insert the Voice VLAN tag to untagged
packets under corresponding ports. If a VoIP packet comes with a VLAN tag, the Voice VLAN function won’t
replace the original VLAN tag.
Figure 61 – Configuration > Voice VLAN > Voice VLAN Setting
Voice VLAN State:
Select to enable or disable Voice VLAN. The default is
Disabled.
After you enabled
Voice VLAN, you can configure the
Voice VLAN Global Settings
.
VLAN ID:
The ID of VLAN that you want to assign voice traffic to. You must first create a VLAN from the
802.1Q VLAN page before you can assign a dedicated Voice VLAN. The member port you configured in
802.1Q VLAN setting page will be the static member port of voice VLAN. To dynamically add ports into the
voice VLAN, please enable the
Auto Detection
function
Priority:
The 802.1p priority levels of the traffic in the Voice VLAN.
3
3
5
5
Summary of Contents for Web Smart Switch DGS-1210-16
Page 1: ......
Page 30: ...5 Configuration D Link Web Smart Switch User Manual Figure 42 User Guide Micro Site 26...
Page 71: ......
