background image

33

D-Link DWA-182 User Manual

Appendix D - Warranty

Industry Canada statement

1.  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 

1)  this device may not cause interference, and 

2)  this device must accept any interference, including interference that may cause undesired operation of the device.

1.  Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée 

aux deux conditions suivantes: 

1)  l’appareil ne doit pas produire de brouillage, et 

2)  l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le 

fonctionnement.

2.  This Class B digital apparatus complies with Canadian ICES-003.

2.  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

3.  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in 

radios. 

3.  Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception 

faites des radios intégrées qui ont été testées. 

4.  The County Code Selection feature is disabled for products marketed in the US/ Canada.

4.  La fonction de sélection de l’indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.

 

Radiation Exposure Statement:

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as 

described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set 

the device to lower output power if such function is available.

 

Déclaration d’exposition aux radiations:

Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement 

non contrôlé.

Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut 

être conservé aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction 

est disponible.

Summary of Contents for WA182D1



































Reviews: