Section 3 - Configuration
D-Link DSL-2750B User Manual
29
INTERNET SETUP
ATM PVC CONFIGURATION
Set
VPI
/
VCI
,
Service Category
and input
Peak Cell Rate, Sustainable
Cell Rate,
and
Maximum Burst Size.
This information was provided by
your ISP, if they do not provide these details leave them as their default
value.
IP QOS SCHEDULER ALGORITHM
Select
Strict Priority
or
Weighted Fair Queuing
CONNECTION TYPE
Protocol
Select DSL link type,
PPP over ATM (PPPoA), PPP over Ethernet
(PPPoE), MAC Encapsulation Routing (MER), IP over ATM (IPoA),
or
Bridging
from the drop-down list.
The ATM settings allow users to adjust ATM Quality of Service (QoS) or
traffic parameters to suit specific traffic requirements. For applications or
circumstances where packet loss or packet delay is a concern, ATM
QoS can be adjusted to minimize pr oblems. For most accounts, it will
not be necessary to change these se ttings. Altering QoS settings can
adversely affect performance of some commonly used Internet
applications
.
If you plan to change QoS or traffic parameters, contact your IS P or
network services provider for info rmation on what types of adjustment
are available or possible for your account. Your ISP may not support the
class of service you want to use.