30
Super G Mode-
Super G is a group of performance enhancement features that
increase end user application throughput in an 802.11g network.
Super G is backwards compatible to standard 802.11g devices.
For top performance, all wirelss devices on the network should
be Super G capable. Select either Disabled, Super G without
Turbo, Super G with Dynamic Turbo, or Super G with Static Turbo.
Disabled-
Standard 802.11g support, no enhanced capabilities.
Super G without
Turbo-
Capable of Packet Bursting, FastFrames, Compression, and no
Turbo mode.
Super G with
Dynamic Turbo-
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with non-
Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all nodes on the wireless network are Super G with Dy-
namic Turbo enabled.
802.11g only mode-
Select this mode to restrict your network to only those devices
that employ the 802.11g standard. Enabling this mode will en-
sure that you maintain the highest connectivity rate, unhampered
by any connection to an 802.11b device.
CTS Mode-
CTS (Clear To Send) is a function used to minimize collisions
among wireless devices on a wireless local area network (LAN).
CTS will make sure the wireless network is clear before a wire-
less client attempts to send wireless data. Enabling CTS will
add overhead and may lower wireless throughput.
Auto-
CTS will monitor the wireless network and automati-
cally decide whether to implement CTS based on
the amount of traffic and collisions that occurs on
the wireless network.
Always-
CTS will always be used to make sure the wireless
LAN is clear before sending data.
None-
CTS is typically used in a pure 802.11g environment.
If CTS is set to “None” in a mixed mode environment
populated by 802.11b clients, wireless collisions may
occur frequently.
Super G with
Static Turbo-
Capable of Packet Bursting, FastFrames, Compression, and
Static Turbo. This setting is not backwards compatible with non-
Turbo (legacy) devices. Static turbo mode is always on and is
only enabled when all nodes on the wireless network is Super G
with Static Turbo enabled.
Using the Configuration Menu (continued)
Advanced > Performance (continued)
