D-Link VDI-624 Owner'S Manual Download Page 24

Page: 24 / 91

Using the Configuration Menu (continued)

Advanced > Filters > URL Blocking

Filters-

URL Blocking is used to deny LAN computers from accessing specific web sites by
the URL.

A URL is a specially formatted text string that defines a location on the

Internet. If any part of the URL contains the blocked word, the site will not be
accessible and the web page will not display. To use this feature, enter the text string
to be blocked and click

Apply.

The text to be blocked will appear in the list. To

delete the text, just highlight it and click

Delete

Select the filter you wish to use; in this case,

URL Blocking

was chosen.

Keywords-

Block URLs which contain keywords listed below.
Enter the keywords in this space.

URL Blocking-

Select

Enabled

Disabled

Summary of Contents for VDI-624




























































































Search results

Summary of Contents for VDI-624

Reviews:

Related manuals for VDI-624

Brands by name

Popular brands

D-Link VDI-624, Owner'S Manual

Search results

Summary of Contents for VDI-624

Reviews:

Related manuals for VDI-624

Brands by name

Popular brands