54
Enable IR Control -
Click this to allow the
DCS-5300W
to be controlled
by the included remote.
Configuration > Advanced >Camera Control (Continued)
Using the DCS-5300W with an Internet
browser (continued)
Current Position -
Enter a name for the position at which you would
like to preset the
DCS-5300W
. Click
Add
to add the
new preset position to the
Preset Locations
list.
Preset Position -
Using the pull down menu, you can delete a preset
position by selecting it and clicking
Delete
.
Dwelling Time -
Set the value of time that the camera will remain on
each preset position before moving to the next. The
dwelling time can be set between 1 and 255
seconds.
Patrol Selection -
To use the Auto Patrol feature, select the desired
preset positions from the
Preset Locations
list and
add them to the
Selected Locations
list by clicking
Select
. You can then select the order in which the
camera will patrol through the preset locations
by selecting a location and clicking
UP
or
DN
.
Click
Remove
to remove a location from the list.
Click
Apply
to make
changes effective
Summary of Contents for SECURICAM Network DCS-5300W
Page 141: ...141 Time Zone Table continued ...
