28
Configuring a DCS-5300 Behind a NAT
Router or Internet Gateway
D-Link’s
DCS-5300
is a versatile and cost effective Internet Camera offering
both video and audio monitoring. It can also serve as a powerful surveillance
system in security applications. The
DCS-5300
can be used with any wired or
wireless router. This section explains how to view the camera from either the
Internet or from inside your internal network.
Materials Needed:
•
1
DCS-5300
Internet Camera
•
1 Ethernet Cable
•
A Wired or Wireless router such as the D-Link DI-614+ Wireless Router
•
Ethernet based PC for system configuration
SETTING UP THE DCS-5300 FOR USE BEHIND A ROUTER
Installing a
DCS-5300
Internet Camera on your network is an easy 4–step
procedure:
Assign a local IP Address to your Internet Camera
View the Internet Camera Using Your Internet Explorer Web browser
Access the Router with Your Web browser
Open Virtual Server Ports for Your Router (Enable Remote Viewing)
This section is designed to walk you through the setup process for installing
your camera behind a router and enable remote video viewing. For the basic
setup of the
DCS-5300
, follow the steps outlined in the
Quick Installation
Guide.
After you have completed the setup of the
DCS-5300
outlined in the
Quick
Installation Guide
you will have an operating camera that has an assigned IP
Address. Because you are using a router to share the Internet with one or
more PCs, the IP Address assigned to the Internet Camera will be a local IP
Address. This allows viewing within your Local Area Network (LAN) until the
router is configured to allow remote viewing of the camera over the Internet.
Run the Installation Wizard program from the CD included with the
DCS-5300
.
Follow the steps in the
Quick Installation Guide
to configure the
DCS-5300
.
The camera will be assigned a local IP Address that allows it to be recognized
by the router.
Assign a Local IP Address for Your Camera
