D-Link DCS-10 User Manual
Section - Configuration
For detailed information about each setting, please refer to
Configuration > Advanced > Mail & FTP
in the section titled
“Using the DCS-2120 With an Internet Browser” (page 29).
Click the apply button when finished.
Next, click the Applications button under the Tools tab to set
the application settings for the DCS-2120.
In this window, follow the steps below to set the application
settings for snapshots to be recorded to an FTP site:
1 Check the
Enable snapshot
box.
2 Select
Weekly schedule
and setup
Time
.
3 Select
Motion Detection
and check the motion window
name (in this case: test).
4 Set the delay to “take snapshots after event” to capture
the direction of the moving object.
5. Click
Send snapshots by FTP
and check “FTP put
snapshots with date and time suffix”.
6. Click the “Apply” button to save the settings.
Click the apply button when finished. You are now able to record snapshots to your FTP server when motion detection
is triggered.
