11
D-Link DCS-10 User Manual
Section - Configuration
For detailed information about each setting, please refer to
Configuration > Advanced > Motion Detection
in the
section titled “Using the DCS-2120 With an Internet Browser” (page 29).
Next, run the IP surveillance program. Click on the Configurations button and select Scheduler.
In the Primary Schedule you can choose either Once (for one time recording) or Every Day (for scheduled recording). For
example, if you would like to record events every day during a certain time frame, click on the beginning time and drag
your mouse to the ending time. Schedule recording can be configured by minutes, hours, days, weeks, or months.
The Secondary Schedule allows you to set a schedule outside
the Primary Schedule. The Secondary Schedule provides two
options to record without a specified date or time. You can
select Event Mode, which will record whenever an event is
triggered, or Continuous Mode, which will begin continuously
after scheduling settings are saved. You do not need to set the
Secondary Schedule with the Primary Schedule. To schedule
video recording with motion detection, you can use either the
Primary Schedule or Secondary Schedule, or both.
