54
D-Link DCS-7110 User Manual
Configuration
FTP
FTP:
Select to send the media files to an FTP server when a trigger is activated.
• Server name:
Enter a name for the server setting.
• Server address:
Enter the domain name or IP address of the FTP server.
• Server port:
By default, the FTP server port is set to 21. It can also be assigned to
another port number between 1025 and 65535.
• User name:
Enter the login name of the FTP account.
• Password:
Enter the password of the FTP account.
• FTP folder name:
Enter the folder where the media file will be placed. If the folder
name does not exist, the camera will create one on the FTP server.
• Passive mode:
Most firewalls do not accept new connections initiated from external
requests. If the FTP server supports passive mode, select this option to enable passive
mode FTP and allow data transmission to pass through the firewall.
To verify if the FTP settings are correctly configured, click
Test
. The result will be shown in
a pop-up window. If successful, you will also receive a test.txt file on the FTP server.
Click
Save
to enable the settings, then click
Close
to exit the page.
