DE-220P Series Ethernet Adapter / User’s Guide
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Multiple Cards in a Non-PnP
System
In non-PnP systems, the procedure for configuring
multiple DE-220P Series cards is basically a se-
quence of separate single-adapter procedures:
make a preliminary installation of each card alone
in turn: make a
setup.
exe run to configure that
card, then remove that card and go on to the next,.
CAUTION:
The following procedure involves operation of the
computer without its chassis housing in place.
Caution is necessary in order to avoid contact
with exposed high-voltage parts.
Accidental
contact with exposed internal
parts
can
cause
personal injury and can cause damage to the
computer equipment.
Make a preliminary installation of the first, DE-
220P Series card by completing Steps 1 through 3
as set
out.
in the ‘Single-Adapter Installation” sec-
tion above.
Restore power to the computer, and configure the
card by running the supplied setup program,
setup. exe.
Make a note of the configuration
settings that, you select, t o help you select,
different
settings in configuring the remaining cards.
Shut. down the computer and unplug its power
cord. Remove the (configured) card, and install
the
next. DE-220P Series
i n t o any
ex-
pansion slot.
2-10
