manualshive.com logo in svg

D-Link NUCLIAS CONNECT DIS-3650AP, User Manual, Page: 90 / 101

Share
Download
D-Link NUCLIAS CONNECT DIS-3650AP User Manual Download Page 90

Web User Interface

90

Configuration File Upload

This page allows the user to backup and recover the current configuration of the access point in case of a unit failure.

Configuration File Upload 

and Download:

Upload Configuration File:

Download Configuration 

File:

Upload Nuclias Connect 

Network File:

You can upload and download 

configuration files of the access point.  

Browse to the saved configuration 

file you have in local drive and click 

“Open” and “Upload” to update the 

configuration. 

Click “Download” to save the current 

configuration file to your local disk. Note 

that if you save one configuration file 

with the administrator’s password now, 

after resetting your DIS-3650AP and then 

updating to this saved configuration file, 

the password will be gone. 

Browse to the saved configuration file 

you have in local drive and click “Open” 

and “Upload” to update the Nuclias 

Connect Network file. 

Summary of Contents for NUCLIAS CONNECT DIS-3650AP






































































































Reviews:

No comments