4
D-Link DSP-W215 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs and Buttons
1
3
2
4
1
WPS/Reset Button
Press for one second to start the WPS connection process. The System Status LED will start to blink green. To reset the
device to factory defaults, press and hold for about 10 seconds until the Status LED turns red.
2
Power Plug
Plug the Smart Plug into a wall power socket.
3
Power Button
Press to turn the connected device on or off.
4
System Status LED
Solid Green
The uplink is established and an IP is provisioned.
Blinking Green
WPS is activated.
Blinking Orange
The uplink is not established or an IP is not provisioned.
Solid Red
The smart plug is powering on or is defective.
Light Off
The smart plug is powered off.
5
Power Socket
Connect your appliances, lamps, and other electronic devices you wish to monitor.
6
Power LED
The LED will be solid green if the power socket is powered on.
6
5
