13
D-Link DCS-8200LH User Manual
Section 2 - Installation
Mounting the Camera
To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera before mounting.
1
Step 1
Turn the base plate on the bottom of the camera counterclockwise with a coin to remove it.
3
2
2. Place the base plate where you want to position the camera and use a pencil to mark the holes. Make sure
the holes are lined up horizontally.
3. Depending on the material of the wall or ceiling, use proper tools to drill two holes 25mm deep with a 6mm
drill bit where you marked. If the wall is made out of concrete, drill the holes first, then insert the plastic
anchors to support the screws.
