Hardware Overview
Power/Status LED
Reset Button
Front View
WPS Button
WPS
Blinking Green
Press for one second to start the WPS
connection process. The Power/Status
LED will start to blink green.
Reset
Solid Red
Press and hold until the Status LED turns
red in order to reset the device back to
the factory default settings
(for about
10 seconds)
.
Power/Status LED
Solid Green
The DCH-S150 is successfully connected
to your network.
Blinking Green
The WPS process is in progress.
Blinking Orange
The Motion Sensor is not properly
connected with your wireless network.
Solid Red
The Motion Sensor is powering on,
attempting to upgrade firmware, or the
device is defective.
Off
If the DCH-S150 will not power on, try
plugging the device into another outlet.
Motion Sensor
PIR (Passive Infrared) sensor for detecting motion.
Motion Sensor
4