27
D-Link GO-RT-N300 User Manual
Section 3 - Configuration
Wi-Fi Protected (WPS) Setup
Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the “Initial setup” as well
as the “Add New Device” processes. The Wi-Fi Alliance (WFA) has certified it across different products as well as manufacturers.
The process is just as easy, as pressing a button for the Push-Button Method or correctly entering the 8-digit code for the Pin-
Code Method. The time reduction in setup and ease of use are quite beneficial, while the highest wireless security setting of
WPA2 is automatically used.
If you wish to use the Push-Button Connection (PBC) method, simply press
the WPS button on the side of the router. The power LED will begin to flash.
Within 120 seconds, press the WPS button on the device that you wish to
connect. The power LED will turn solid green if the connection is successful.
To connect using the PIN method, click
Next.
to begin the WPS setup process.
Enter the PIN for the wireless NIC and click
Start PIN
. If successful, you will
then be taken to another screen and a message will tell you to run WPS in the
client device within 2 minutes.
