2
First, plug in the
power supply
as
shown. Plug the other end of the
power supply into the power source.
Flip the
POWER
toggle switch to the
ON
position
.
(During a self -test phase, the
indicator lights will flash briefly. At
the end of the self-test, the M1
indicator light will flash continuously
to indicate normal operation.)
Next, connect the
WAN
port to
the
Cable
or
DSL
modem using
an
Ethernet cable.
Using CAT5 UTP cable,
connect each computer that is
equipped with an Ethernet
adapter to one of the
four
Ethernet LAN
ports on the DI-
707P.
The LED for the specific Local
Ethernet Port will light up to
indicate connection.
Connecting the DI-707P
Ethernet Broadband Router to your
network
