43
D-Link DIR-1960 User Manual
Section 4 - Configuration
PPPoE (continued)
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.
If
Enable DHCP-PD
is disabled these additional parameters are available for configuration:
LAN IPv6 Address:
If DHCP-PD disabled or static address mode is selected, enter the LAN
(local) IPv6 address for the router.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.
Advanced Settings - Address Autoconfiguration Settings
Enable Automatic
IPv6 Address
Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature.
If
DHCP-PD
is enabled in LAN IPv6 Address Settings:
Enable Automatic
DHCP-PD in LAN:
Enable or disable DHCP-PD for other IPv6 routers connected to the
LAN interface.
Note:
This feature requires a smaller subnet prefix than
/64 (i.e. allowing for a larger address allocation), such as /63. Contact
your ISP for more information.
Autoconfiguration
Type:
Select
SLAAC+RDNSS, SLAAC+Stateless DHCP,
or
Stateful DHCPv6
.
If you selected
SLAAC+RDNSS
or
SLAAC+Stateless DHCP
as the Autoconfiguration Type:
Router
Advertisement
Lifetime:
Enter the router advertisement lifetime (in minutes).
