22
D-Link E30 User Manual
Section 3 - Configuration
Configuration
Home
The home screen gives a summary of the current status of devices connected to the E30. A green check between the device and
the uplink router indicates that there is an active connection. A red cross indicates that there is no connection present, or there is a
connection error. If there’s no active uplink connection, click on
Click to repair
to start the setup wizard.
Note:
If the E30 is connected to a Wi-Fi Mesh supported router, then the home screen will only show the Firmware Upgrade function.
Management functions for the E30 can then be configured from the main router’s configuration page. For more details, refer to “Home
- Connected to a Wi-Fi Mesh Router” on page 25.
Uplink Router
This icon shows the status of the Internet connection to the uplink router. It is grey if the E30 is not connected to an
uplink router. Once connected, click on it to see its connection details.
E30
Click on this icon to see network setting status such as IPv4 and IPv6 configurations of the E30.
Connected Clients
Click on the Connected Clients icon to see client details.