background image

DXS-3600 Series 10GbE Layer 2/3 Switch Web UI Reference Guide

21

Appendix B - System Log Entries

The following table lists all possible entries and their corresponding meanings that will appear in the System Log of this 
Switch.

Category

Log Description

Severity

Note

IP Directed-
broadcast

Event description: IP Directed-broadcast rate exceed 50 packets per 
second on a certain subnets.
Log Message: IP Directed Broadcast packet rate is high on subnet.  [(IP: 
%s)]

Parameters description:
IP: the Broadcast IP destination address.

Informational

Event description: IP Directed-broadcast rate exceeds 100 packets per 
second.
Log Message: IP Directed Broadcast rate is high.

Parameters description: None.

Informational

TFTP

Event description: Firmware upgraded successfully.
Log Message: [TFTP(1):] Firmware upgraded by <session> was 
successfully (Username: <username>, IP: <ipaddr>, MAC: <macaddr>)

Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.

Informational

Event description: Firmware upgrade was unsuccessful.
Log Message: [TFTP(2):] Firmware upgrade by <session> was 
unsuccessfully (Username: <username>, IP: <ipaddr>, MAC: <macaddr>)

Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.

Warning

Event description: Firmware successfully uploaded.
Log Message: [TFTP(3):]Firmware successfully uploaded by <session> 
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)

Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.

Informational

Event description: Firmware upload was unsuccessful.
Log Message: [TFTP(4):]Firmware upload by <session> was unsuccessful! 
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)

Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.

Warning

Summary of Contents for DXS-3600 Series

















































Reviews: