D-Link DWS-4000 Series, Cli Command Reference

Page: 100 / 566

D-Link Unified Switch CLI Command Reference
92
© 2009 D-Link Corporation. All Rights Reserved
no port-channel system priority
Use this command to configure the default port-channel system priority value.
show lacp actor
Use this command to display LACP actor attributes.
The following output parameters are displayed.
show lacp partner
Use this command to display LACP partner attributes.
The following output parameters are displayed.
Format
no port-channel system priority
Mode Global Config
Format
show lacp actor {<slot/port>|all}
Mode Global Config
Parameter Description
System Priority The administrative value of the Key.
Actor Admin Key The administrative value of the Key.
Port Priority The priority value assigned to the Aggregation Port.
Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs.
Format
show lacp actor {<slot/port>|all}
Mode Privileged EXEC
Parameter Description
System Priority The administrative value of priority associated with the Partner’s System ID.
System-ID The value representing the administrative value of the Aggregation Port’s protocol Partner’s System
ID.
Admin Key The administrative value of the Key for the protocol Partner.
Port Priority The administrative value of the Key for protocol Partner.
Port-ID The administrative value of the port number for the protocol Partner.
Admin State The administrative values of the actor state for the protocol Partner.