D-Link DWR-966 User Manual Download

Page: 68 / 80

Current Time:

Displays the current time of the DWR-966.

Automatically get date and time:

Select this item to obtain date and

time information automatically.

Time Zone:

Select the local time zone.

Enable Daylight Saving:

If supported by the NTP servers for your region,

you can check Automatically Adjust for Daylight Savings Time.

NTP Server1:

The NTP server to sync. Default is 0.us.pool.ntp.org

NTP Server2:

The second NTP server to sync in case the first one does

not respond. Default is 1.us.pool.ntp.org.

NTP Server3:

The third NTP server to sync in case the first and second

do not respond. Default is 2.us.pool.ntp.org.

Configure date and time manually:

Select this if you would like to set

the time manually.

Click Apply to apply the changes, or click Reset to undo your

configurations.

Summary of Contents for DWR-966

















































































Search results

Summary of Contents for DWR-966

Reviews:

Related manuals for DWR-966

Brands by name

Popular brands

D-Link DWR-966, User Manual

Search results

Summary of Contents for DWR-966

Reviews:

Related manuals for DWR-966

Brands by name

Popular brands