manualshive.com logo in svg

D-Link DWR-920V, User Manual, Page: 14 / 38

Share
Download
D-Link DWR-920V User Manual Download Page 14

10

D-Link DWR-920V User Manual

Section 3 - Configuration

Connect via Wi-Fi

Note:

 

The following example uses Windows 7’s built-in wireless connection utility. If you are using a different operating system, or a third party connection 

utility, the process may be different. Please refer to the documentation that came with your operating system or wireless client for further information on 

how to connect to a wireless network.

To connect to the router using Wi-Fi, open your operating system’s wireless networking utility 

and scan for available networks to connect to. By default, the network name (SSID) of the 

DWR-920V will be in the format 

dlink_DWR-920V_xxxx

, where “

xxxx

” represents the last 

four characters of the DWR-920V’s MAC address. The default SSID and password can also be 

found on the product label attached to the battery cover. For more information on where to 

find this label refer to 

Hardware Overview 

on page 4.

Once you have located your DWR-920V’s wireless network, select it and click 

Connect

.

dlink_DWR-920V_xxxx

dlink_DWR-920V_xxxx

Summary of Contents for DWR-920V







































Reviews:

No comments