manualshive.com logo in svg

D-Link DWR-830, User Manual

Share
Download
D-Link DWR-830 User Manual Download Page 97

To comply with radiofrequency radiation (RF) exposure guidelines during body worn operation, this device must be used with a minimum of 0.5 

D-Link DWR-830 User Manual

93

Appendix D - Safety

Specific Absorption Rate (SAR)

This mobile device is a radio transmitter and receiver. It is not designed to exceed the limits for exposure to radio waves recommended by 
international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins 
designed to assure the protection of all persons, regardless of age and health.

The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR.

The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested complied with this limit.

cm separation from the body.

Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits.

Warnings and Declarations 

Summary of Contents for DWR-830





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands