manualshive.com logo in svg

D-Link DWM-312, User Manual, Page: 29 / 96

Share
Download
D-Link DWM-312 User Manual Download Page 29

25

D-Link DWM-312 User Manual

Section 4 - Configuration

VPN

IPSec

VPN Settings

Tick this box to enable the IPSec VPN function.

Tick this box to receive Netbios from Network Neighborhood.

Some NAT routers and ISPs will block IPSec packets if they don’t 

support IPSec passthrough. If you connect to another NAT router 

which doesn’t support IPSec passthrough on the WAN side, you 

need to activate this option.

Tick this box to enable this feature and click 

More

 to configure 

VPN Dynamic IP on a separate page. Please see the next page for 

more details.

Tunnel details are displayed here. Click 

More 

to configure a 

new tunnel or click 

Disconnect 

to disconnect from an existing 

tunnel. Select the 

Enable 

checkbox to activate this rule. In tunnel 

settings page, you can click 

More 

under 

Action 

for detailed tunnel 

settings.

Click 

Apply

 to save your settings, or 

Refresh

 to revert to your 

previous settings.

VPN-IPSEC:

Netbios over 

IPSEC:

NAT Traversal:

Dyanmic VPN:

Tunnel Settings:

The DWM-312 supports a number of virtual private network (VPN) protocols. VPNs are used to create virtual private tunnels to remote VPN 

gateways. The tunnel technology supports data confidentiality, data origin authentication, and data integrity of network information by utilizing 

encapsulation protocols, encryption algorithms, and hashing algorithms. Supported protocols as a client include: IPSec, PPTP, L2TP, and GRE. 

Supported protocols as a server include PPTP and L2TP.

Summary of Contents for DWM-312

































































































Reviews:

No comments