DWL-AG700AP Install Guide
Connecting to your network
D-Link Systems, Inc.
3
DWL-AG700AP Install Guide
Connecting to your network
Connecting the DWL-AG700AP
to your network
Reset Button
A. Receptor
Receptor for Power Adapter.
A.
B.
C.
B. LAN Port
This is the connection for Ethernet cables to
attach to your Ethernet-enabled device.
C. Antenna
Used to wirelessly connect to
802.11a/g networks.
Connect the power adapter to the receptor on the rear panel
of the DWL-AG700AP and then plug the other end of the
power adapter to a wall outlet or power strip. The power LED
will turn ON to indicate proper operation.
Using an Ethernet cable, insert one end of the cable to the
LAN port on the rear panel of the DWL-AG700AP and the other
end of the cable to a switch. Note: You also have the option of
connecting the DWL-AG700AP directly to the computer that will
be used for confi guration. The link LED will illuminate to indicate
a proper Ethernet connection.
Computers with 802.11a/g wireless adapters can connect to
the DWL-AG700AP.
